February 23, 2023 Nazım Babacan received the title of "Associate Professor" given by UAK (Inter-Universities Council of the Turkish Republic).
January 19, 2023 Nazım Babacan joined to the COST Action CA2115 "Advanced Composites under HIgh STRAin raTEs loading: a route to certification-by-analysis (HISTRATE)" as a Working Group Member.
December 7, 2022 "Tailoring the superelastic properties of an additively manufactured Cu–Al–Mn shape memory alloy via adjusting the scanning strategy” was published in “Materials Science & Engineering A". https://doi.org/10.1016/j.msea.2022.144412
November 15, 2022 Our scientific research project named "The Effect of Interlayer Time on Microstructure and Mechanical Properties of Co-Cr Alloy in Selective Laser Melting Production" with a budget of 29,636.41 TL was accepted by Sivas University of Science and Technology BAP Committee.
October 14, 2022 Müyesser Çerçi presented our study entitled "Eklemeli İmalat ile Üretim için Uçak Kanat Rib Yapısının Topoloji Optimizasyonu" in the "Savunma Sanayi Sempozyumu ve Sergisi’ 22".
October 13, 2022 Hübannur Şeremet presented our study entitled "Deformation Behavior and Compression Characteristics of New Design Lattice Structures Manufactured by Metal Additive Manufacturing" in the "Sivas International Conference on Scientific and Innovation Research".
September 8, 2022 Nazım Babacan presented our study entitled "Effect of Remelting on a Superelastic Cu-Al-Mn Shape Memory Alloy Fabricated by Laser Powder Bed Fusion" in the "12th European Symposium on Martensitic Transformations (ESOMAT 2022)".
September, 2022 Hübannur Şeremet defended her MSc thesis entitled "Mechanical Performance of AlSi10Mg Novel Lattice Structures Fabricated by Selective Laser Melting" successfully and got her master degree. Congratulations!!!
September 3, 2022 Muhammed Taha Yıldız presented our study entitled "Investigating the Surface Roughness of Co-Cr Alloys Produced by Laser Powder Bed Fusion with Constant Energy Density" in the "5. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’22)".
August 31, 2022 Our article named "Investigation of The Load-Bearing Capacity of Co-Cr Lattice Structures Fabricated by Selective Laser Melting" was published in “International Journal of 3D Printing Technologies and Digital Industry”. https://doi.org/10.46519/ij3dptdi.1139802
June 29, 2022 Our article named "Evaluation of Mechanical Performance of a Fe-Mn-Si Biodegradable Stent using Finite Element Simulations" was published in “Turkish Journal of Nature and Science”. https://doi.org/10.46810/tdfd.1097511
June 28, 2022 Our article named "Effect of Unit Cell Height on the Ballistic Performance of the Body-Centered Lattice Structures” was published in “International Journal of Innovative Engineering Applications”. https://doi.org/10.46460/ijiea.1054219
April 1, 2022 Hübannur Şeremet presented our study entitled "Investigating the Dynamic Compression Response of a Novel Lattice Topology via Finite Element Analyses" in the "2nd International Symposium on Light Alloys and Composite Materials".
March 29, 2022 Our scientific research project named "The Effect of Different Co-Cr Metal Powders on the Mechanical Properties of Dental Crowns Produced by Additive Manufacturing" with a budget of 144,931.97 TL was accepted by Sivas University of Science and Technology BAP Committee.
